Go to control Panel go to Network and Sharing. Click Change Adapter Setting. Right Click on your Local Area Connection and Click Properties. Click the Internet Protocol Version 4 (TCP/IPV4) Then Click Properties on The lower Right pane. Then on the General Tab Ignore the IP section and focus on the DNS set up. The first thing you need to do is to connect to Technicolor / Thomson TC7200. Next, find router IP, you can check Technicolor / Thomson TC7200 IP here. Then open a web browser and enter the router IP address in the address field. You will see Technicolor / Thomson TC7200 login page. Enter Technicolor / Thomson TC7200 factory login :: admin; and How to update TECHNICOLOR CGA4234: First, you need to download firmware from the official website of your router manufacturer. Next, login into the router, check how to Open Admin Page. Now choose Maintenance and find Update or Firmware Update. Then, press on Choose file and pick downloaded Firmware. At last, click on Upload and wait for a moment. Wi-Fi IEEE 802.11b/g/n on board Interfaces other WPS button Reset button Dimensions 220 x 165 x 42 mm (8.7 x 6.5 x 1.6 in.) Power supply 120-240 VAC, 50-60 Hz Operating temperature 0° to 40° C (32° - 104° F) Operating humidity 20 % to 90 % non-condensing Storage temperature -20° to 70° C (-4° - 158° F) You will find your network name on the bottom of your WLAN modem. The details you require to set up WLAN can be found on the bottom of the WLAN It is called SSID and starts with UPC. Page 37 Manual WLAN Modem Manual WLAN Modem 3.3 Manual WLAN set-up with Windows 7 Tick both options and confirm with “Close”. If you want to connect to TECHNICOLOR TC7200-U for the first time you will need to know the default TECHNICOLOR TC7200-U password. Follow these steps to learn how to find TECHNICOLOR router factory password. This is the best method to access the TECHNICOLOR TC7200-U panel for the first time, using a password set by the manufacturer of the The TC7200.20 networked ports are: the DOCSIS cable modem, the four GE LAN ports and the Wireless Access Wireless interface activation/deactivation Per default the Wi-Fi access point is activated. Wireless access point may be deactivated/activated by a short press (1 to 3 seconds) on the WPS button on the front of TC7200.20. Changing the Administrative Password. Log into the modem interface. Click Toolbox in the left-hand menu. Click User Management. Click Change my password under Pick a task. Leave the Old Password field blank, type a new password and again to confirm. Note: if you had previously changed your modem's password, you will need to enter this into Old Kgjpxg.